Filter
Top Products
Setting Up TCP/IP
23
3.
On the DNS Configuration tab,
add the IP address for the
Barricade Router
and click
Add. This automatically
relays DNS requests to the
DNS server(s) provided by
your ISP. Otherwise, add
specific
DNS servers into the
DNS Server Search Order
field and click Add.
4. After finishing TCP/IP setup,
click OK, and then reboot
the computer. After that, set
up other PCs on the LAN according to the procedures
described above.
Verifying Your TCP/IP Connection
After installing the TCP/IP communication protocols and
configuring an IP address in the same network as the Barricade
Router, use the Ping command to check if your computer has
successfully connected to the Barricade Router. The following
example shows how the Ping procedure can be executed in an
MS-DOS window. First, execute the Ping command:
ping 192.168.2.1
If a message similar to the following appears:
Pinging 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes=32 time=2ms TTL=64
a communication link between your computer and the Barricade
Router has been successfully established.
If you get the following message,