Filter
Top Products
25
CONFIGURING THE
BARRICADE ROUTER
The Barricade Router can be configured by any Java-supported
browser including Internet Explorer 4.0 or above, or Netscape
Navigator 4.0 or above. Using the Web management interface,
you can configure the Barricade Router and view statistics to
monitor network activity.
Note: NOTE: Before you attempt to configure your router, if
you have access to the Internet please visit
www.smc.com
and download the latest firmware
update to insure your router is running the latest
Before you attempt to log into the Barricades Web-based
Administration, please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Barricade. If you don’t have a link light –
then try another cable until you get a good link.
Browser Configuration
Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
This is configured through the options/preference section of your
browser.