Filter
Top Products
<P=002>
MEMORY IS FULL
The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been
received to memory because printing is not possible
(an additional message will indicate the problem),
resolve the problem so that printing can continue
(see
Substitue Reception to Memory
in Chapter 3). If
you are attempting to transmit from memory, see
Sending Documents from Memory
in Chapter 7.
MEMORY PRINTING
The fax is preparing to or printing out a document
from memory.
NO DATA
This appears if you attempt to search for an
automatic dialing number when none have been
stored.
NO # STORED
You have tried to dial or clear a Rapid Key or Speed
Dial number that hasn’t been programmed (a full
number hasn’t been assigned to it).
OUT OF PAPER
You are out of printing paper (or the paper release
plate is open). Load paper as described in
Loading
Printing Paper
in Chapter 1.
ON HOOK DIAL
The SPEAKER key has been pressed and the fax is
waiting for you to dial. (To return to the date and time
display, press the SPEAKER key again.)
OVER HEAT
The print head has overheated. Operation can be
continued once it cools.
PAPER JAMMED
The printing paper is jammed. See the following
section,
Clearing Paper Jams
.
READY TO SEND
A document has been loaded and the fax is waiting
for transmission or copying instructions.
RECALLING
This appears if you attempt to send a fax by
automatic dialing and the line is busy or the receiving
fax machine does not answer. Your fax machine will
automatically reattempt the call. (See
Automatic
Redialing
in
Sending a Fax by Automatic Dialing
in
Chapter 2.)
Display Messages
112