Filter
Top Products
32
To program the word “Clerk01” with the letter “C” being double size.
To make the letter “C” double size character
To make character size return to normal size
To toggle the characters to lower-case letters
Entering character codes with numeric keys on the keyboard
To enter a numeral, letter or symbol, enter a character code using numeric keys and press the numeric key
:
.
For the character codes, please refer to the alphanumeric character code table on the next page. Be doing this,
you can program characters other than those on the key tops.
• Double-size characters can be made by entering the character code 253 or pressing the
W
key. “W” is
displayed when double-size characters entry is selected as shown in the operator display example below.
• All three digits of the character code MUST be entered (even if it starts with zero).
Operator display (Example)
To program the word “SHARP” in double-size characters
253
:
083
:
072
:
065
:
082
:
080
:
S H A R P
PGM
01 W 065
Character code
=A PGM
01 W 02
Characters: Indicating double size character of “A”
Number of characters
programmed
Press of
253
:
065
Press of
:
Cursor
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered are displayed here.
=C PGM
01 02
=C PGM
01 W 02
=C PGM
01 a 02
Wg
W
H
hijk01
=Clerk01 PGM
01 a 08
A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 32