Filter
Top Products
Operation
E-17
• When connecting third party video cards and other
Macintosh computers, set “MODE” to “ON” or “OFF” to
select the correct display mode.
• When the input signal is automatically detected or when
there is no input signal, “MODE(---)” appears on the
screen and the display mode cannot be changed.
Initial Reset
To return “CLOCK”, “PHASE”, “H-POS” and “V-POS”
adjustments to their initial settings, select “RESET”
and then press ENTER.
Memory Select
Used to store up to seven computer mode
adjustments. (See below.)
• Avoid displaying computer patterns which repeat every other
line (horizontal stripes). (Flickering may occur, making the image
hard to see.)
To return to normal screen, press MENU.
Computer Mode Memory Adjustments
This projector allows you to store up to seven RGB
input adjustment settings for use with various
computers. Once these settings are stored, they can
be easily selected each time you connect the
computer to the projector.
a. Customizing the RGB input
adjustment settings
1. Press MENU to display the menu screen. Press
ADJUSTMENT ∂/ƒ to select “RGB1 INPUT
ADJ.” Then press ENTER to display the “RGB1
INPUT ADJ.” screen.
2. Press ADJUSTMENT ∂/ƒ to select “MEMORY
SELECT”. Then press ENTER to display the
“MEMORY SELECT” screen.
3. Press ADJUSTMENT ƒ once, then press
ADJUSTMENT ß/© to select the number of the
memory adjustment mode you want to adjust.
• If the memory position has not been set, “NON” will appear on
the screen.
• Memory No. 0 cannot be set. It contains the fixed factory preset
setting.
4. Press ADJUSTMENT ∂/ƒ to select “SETTING”.
Then press ENTER to return to the “RGB1 INPUT
ADJ.” screen.
5. Press ADJUSTMENT ∂/ƒ to select the item you
want to adjust. Then press ADJUSTMENT ß/©
to adjust the setting.
6. Press MENU to store the adjusted RGB input
adjustment setting under the number of the
selected memory adjustment mode.
Computer Adjustments
RGB1 ADJ.
RGB1 INPUT ADJ.
IMAGE ADJ.
AUDIO
SYSTEM SETUP
LANGUAGE
:SEL. :NEXT
ENTER
:END
MENU
MEMORY SELECT
SETTING
:SEL. :BACK
ENTER
:END
MENU
0 1 2 3 4 5 6 7
MEMORY SELECT
:SEL.
:ADJ.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
RESOLUTION
HOR FREQ
VERT FREQ
SETTING
:ENTER
Hz
KHz 60.0
75
1024×768
RGB1 INPUT ADJ.
+
:SEL. :NEXT
ENTER
:END
MENU
[–––]
-
+
-
+
-
+
-
PHASE
H-POS
V-POS
MODE
[
OFF
]
AUTO SYNC
RESET
MEMORY SELECT
0
0
0
0
CLOCK
MEMORY SELECT
NON
SETTING
:SEL.
ENTER
:END
MENU
0 1 2 3 4 5 6 7
:ENTER
On-screen Display
a.1 a.2 (a.5)
a.3
a.4
XG-NV4SU (E)-b 98.10.19, 5:37 PM17