Filter
Top Products
T12017-Sentry_LANServer_Users_Manual Page 42 of 59
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@fieldserver.com
Error Message User Action / Notes
WEB:#13 Err. Not enough
space for alarm page.
WEB:#15 FYI. Taglist.ini is
absent. This is a non-sentry
config.
WEB:#16 Err. No Sentry
Objects
WEB:#17 Err. No Sentry
Objects
WEB:#18 Err. Open file
handle, closed socket.
WEB:#19 Err. Reading event
record file.
WEB:#20 Err. Bad file pos.
WEB:#21 Err. Opening event
record file.
WEB:#24 Err. Too many
Sentry nodes for Port.
Max=%d <%s>
Max number of nodes per port 25 from version 1.08nf, 20 for previous
versions.
WEB:#25 Err. Too many
Sentry Ports. Max=%d <%s>
Max number of nodes per port 25 from version 1.08nf, 20 for previous
versions.
WEB:#26 Err. Cant open
required file 'nodes.htm
The file nodes.htm is essential to the operation of the LANServer when
it is used for Sentry applications. It should have been prepared and
downloaded by the tows.exe application. Use that application again to
download your project to the LANServer. When this error is printed,
the configuration LED is turned on. This is done once each time the
LANServer is reset.
WEB:#27 Err. Sentry Port
badly formatted. <%s>
WEB:#28 Err. Sentry Port
must be P or R. <%s>
WEB:#29 Err. Sentry Port has
no nodes.
WEB:#30 FYI. No Sentry
Ports defined.
WEB:#31 Err. Cant open %s
for update.
WEB:#32 Err. Event write
failed.
WEB:#32 Err. Event index
write failed.
WEB:#42 FYI. Event storage
disabled.
WEB:#42 FYI. Event storage
disabled.
WEB:#45-4 Err. Open file
found. File [Quest.htm] idx=0
WEB:#45-%d Err. Open file
found. File [%s] idx=%d
This 'error' is printed when the driver closes a reply state-engine and
finds an open file.
A common reason for seeing this 'error' is that a user pushed 'Stop' /
Refresh or clicked a link before a file and been fully served. It is not an
error and may be safely ignored.
WEB:#47 Err. Security.htm
invalid (no users). Read
Manual