Sierra VSP 3001 Webcam User Manual


 
23
Appendix 3: Specification
Hardware
100 levels are optional
Brightness
NTSC/PAL: 640x480, 320x240, 160x120
Ethernet(10 Base-T)
TCP/UDP/IP, ARP, ICMP, HTTP, TFTP, Telnet, SMTP
max. 30 frames/second. Net: max. 300Kbytes/second
Trigger: I/O input/timer(frequency/motion detection
Response: TFTP / E-mail / I/O output to peripheral
equipment
Assign the IP address: use ARP or through administrator page
through TELNET
Microsoft IE5.x or later, Netscape Navigator 4.x or later,
Win98/NT/2000/XP
2 layer password protection
0 - 40
20-80 %
DC12V, 1A
<10 watts
100 77mm
0.60kg with power
* Frame rate will change with the condition of a network and the PC performance.
* A sensor must be attached for alarm mode.
System requirement
Security
Operation temperature
Humidity
Power
Consumption
Dimension
Weight
Image size
Image
Resolution
Ethernet port
Network protocol
Performance
Trigger and
response
Installation
Update firmware
CPU: 32 Bits RISC
ROM: 2M Bytes Flash ROM
RAM: 16M Bytes SDRAM
1 RJ-45 for Ethernet
1 I/O input terminal and 1 I/O output terminal