Filter
Top Products
6
4.3 Connecting to Internet through HUB/Switch/Router
For this program, not only the basic setup of PC and IP camera but also the setup of
Port Forwarding function of Router is required, so the visit for network camera besides
Intranet is accessible. The Router should have the function of Network Address
Transition(NAT) to transit the global address to local address and assign the different
external port No. to each IP camera.
4.4 Access home page of IP camera
If the IP browser is Internet Explorer, the download for ActiveX is required. So,
reset the security level of the IE as low level(Tools menu > Internet Options > Security tab
> Custom level), and then enter HTTP://192.168.1.252 to the address field to open the
home page of VSP-3001 network camera. Click the Single Camera Screen Mode, and wait
a minute till the image appearing, then set the security level to its original level.(The PC
will save the program of ActiveX after reading it, so the security level can be set to its
original level.)
If the IP browser is Netscape Navigator, please enter directly HTTP://192.168.1.252
to address field to open the home page of VSP-3001
IP camera. Click the Single Camera
Screen Mode, wait a minute and then the image will appear.
INTERNET
Users
Users
Record server
Router
Reticle
Link Builder / Switcher