Filter
Top Products
3. OPERATING INSTRUCTIONS page 11
Model BM-286A
Set-Up Waste Streams:
Set-Up Waste streams allows the operator to enter the parameters for the various
waste streams.
3.3. NORMAL OPERATION
An operator must be "logged on" before the system can be operated. To log on, the operator
must have an operator I.D. and badge number assigned by the system administrator.
To log on, the operator must:
press the log on button
enter the operator I.D.
press <Enter>
enter the badge number
press <Enter>
enter the password
press <Enter>.
NOTE:
To prevent unauthorized use of the system, the operator must log off by pressing the log off
button whenever the unit is left unattended.
After the initial background has been collected and an operator has logged onto the system, the
monitor is ready for operation.
Place the container to be scanned on the weight scale platform and close the door to initiate a
scan. Note that all detector windows turn gray while the door is open. The monitor will read the
scale when the door is closed.
If no weight (<5 lb) is detected in the chamber, the monitor will return to background update
mode.