Filter
Top Products
9Appendix
Users Manual CX2
Write configuration information using an editor.
1. Connect the USB memory your PC.
2. Description of configure file.
You can create a description file in Windows notepad.
The following is a description of the format.
Format
----------------------------------------------------------------
silex
Wireless Mode = 1
SSID = GROUP
Channel = 11
USE WEP = 0
WEP Key = 00000000000000000000000000
DHCP/BOOTP = 1
RARP = 1
IP Address = 0.0.0.0
Subnet Mask = 0.0.0.0
Default Gateway = 0.0.0.0
----------------------------------------------------------------
- You should write silex in first line of the file.
- A file edited incorrectly in notepad may be not supported.
- Each parameter is specified by parameter name = parameter and enter.
- The function is limited in using USB memory.
Configure Name Parameter
Wireless Mode 0:OldAdHoc, 1:AdHoc, 2:Infra
SSID
Channel 1--14
USE WEP 0:NONE, 1: 64bit, 2:128bit
WEP Key 10 or 26 line hex(0-9, a-f)
DHCP/BOOTP 0:Desable, 1:Enable
RARP 0:Desable, 1:Enable
IP Address 0.0.0.0-255.255.255.255
Subnet Musk 0.0.0.0-255.255.255.255
Default Gateway 0.0.0.0-255.255.255.255
Wireless
TCP/IP