Filter
Top Products
15Appendix
Users Manual SX
Tab Explanation
Factory
Default
Enable/Disable SMTP protocol operations. If
"Disable" is selected, e-mail "send" function is
not available.
DISABLE
Setting SMTP server host name. Enter a domain
name or IP address as host name. If a domain
name is used, it is necessary to configure the
DNS server.
-
Setting the sender address (From Address).
Usually the mail address of the network
administrator is set.
-
Setting mail destination address (To Address).
-
Mail is sent while the printer is off line.
OFF
Mail is sent when the printer is out of paper.
OFF
Mail is sent when abnormal conditions are
encountered in the printer.
OFF
In regular intervals the existence of events is
checked. This interval is defined in minutes. If
more than one event occurs within this interval, a
bundled report is sent.
10
Enter the SMTP port number. It is recommend to
use the default value (=25).
25
Specify the signature string to be added at the
end of an e-mail.
---------------
PRICOM SX-300U
[00:80:92:XX:XX:XX]
---------------
(Name of PRICOM and
lower 6 digits of
Ethernet address)
Item
Use SMTP Protocol
SMTP Server Name
From Address
SMTP
Check Interval
SMTP Port
Number
Signature
Offline
Paper out
Printer error
Advanced Setup Event to Address
To Address
(1-2)
SMTP Setup