Filter
Top Products
5-3Using PRICOM in UNIX/Linux Environment
Users Manual SX
Add the combination of IP address and Ethernet address to be used by the PRICOM in UNIX
/etc/ethers and activate RARPD. IP address will be configured on PRICOM by turning the
power on.
-To configure IP address by RARP, you need a workstation that is running within the network.
The below shows an example of IP address configuration by UNIX RARP server.
Example: Ethernet address is “00809200110f”, IP address is “192.168.10.100” and host
name is “pbox”.
1. Add following configuration to /etc/ethers.
00:80:92:00:11:0f 192.168.10.100 #pbox
2. Reboot RARPD.
rarpd -a
3. Reset PRICOM and printer.
TIP
Configuring IP Address by RARP