Filter
Top Products
21
ht3000e
MENUS
LANGUAGE
It allow to select the languages available for the On Screen
Display menus.
INPUTS LIST
In order to make the HT3000E system increasingly flexible, the
functions described below make it possible to modify the inputs
selection menu and adapt it so that it matches the require-
ments of the user more closely. The main page displays all the
inputs physically present on the projector.
You can delete any inputs which are not in use. To do this,
select the input in the pull down menu which appears when
you press ◀, and choose whether to activate or deactivate
the input (Fig.29).
The deactivation or activation of the source results in automatic
renumbering of the remaining active inputs.
2 S-VIDEO
4 GRAPHICS RGB/YPrPb
3 COMPONENT / RGBS
1 VIDEO
1
2
3
4
S-VIDEO 3
GRAPH RGB 9
COMP RGB 5
VIDEO 1
5
5
HDMI
HDMI 5
Imputs
ACTIVE
NAME
Yes No
6
6
HDMI
HDMI 6
Active video signal sources (shown in the inputs selection menu)
are distinguished by tick symbols.
It can useful to identify the input with a user defined name
rather than the type of signal (for example, with the name of
the connected device).
To do this, in the pull down menu select
NAME
and rename the
source.
This makes it easier to remember which source is connected to
a given input; you can use up to 12 alphanumeric characters
for the name (for further details, see
ENTERING TEXT
).
LAMP POWER
To obtain the greatest picture quality, the LAMP POWER para-
meter setting is used to vary the power with which the lamp
is supplied. In this way, besides adjusting the brightness of the
images to your projection conditions (size and type of screen,
environmental brightness), the lamp will have a longer life.
POWER ON
If selected (
AUTO
), this option allows the system when the
projector is connected to the mains power supply.
In STANDBY mode the projector remain in STANDBY mode and
awaits the power-up command from the remote control or
keypad.
TEST PATTERNS
Displays a series of five test patterns, which are useful when
installing the system and checking basic functions. Use the ◀
and ▶ keys to browse through the test patterns (Fig. 27).
INITIAL SETTINGS
Reconfigures the projector to original factory settings except
Position, Orientation, Y/C Delay, Zoom and Focus (Fig. 28).
Fig.27
Fig.28
No
Confirm?
Yes
Fig. 29
Fig.26
KEYST ONE
20%