Filter
Top Products
Unaligned projected image
The SMART V25 projector image can slip if the projector is moved often or installed in a location
prone to vibration, such as next to a heavy door. Follow these precautions to help prevent the image
from becoming misaligned:
l Make sure that the installation wall is plumb and square and doesn’t move or vibrate
excessively.
l Make sure that there are no obstructions behind the projector’s wall-mounting bracket, and that
the bracket is firmly secured to the wall according to the installation instructions.
l Make sure that the knob and locking screw are tight.
l Confirm that all cables are held in place with the appropriate cable clip.
l Adjust the projected image. See the included installation instructions for the SMARTBoard
480iv and 680iv interactive whiteboard system (smarttech.com/kb/153153) and Adjusting the
image on page 19.
C HA PTER 6
Troubleshootingyour interactivewhiteboardsystem
48