Filter
Top Products
Connecting computer 2
You can connect a second laptop to the installed USB cable and video cable that is connected to the
back terminal panel of your interactive flat panel. If those cables aren't installed, connect the laptop to
the side terminal panel (see Connecting a guest laptop on page 47). For adiagram of the various
computer options, see Connecting computers to your interactive flat panel on page 16.
I MP OR TA N T
The laptop must have SMARTProductDrivers installed. If it doesn’t, you need to connect the
laptop to the interactive flat panel using a SMARTGoWire cable. If you purchased an
SBID8055i-SMP or SBID8055ie-SMP model, you can use the supplied SMARTGoWire cable to
connect your laptop to the interactive flat panel. For more information, see Using aSMARTGoWire
cable on page 48.
g To connect computer 2
1. Place the laptop beside the ends of the cables at the computer 2connection.
2. Connect the installed USB cable to a USB receptacle on the laptop.
3. Connect the VGA cable connector to the laptop.
4. Turn on the computer.
5. Press the VGA2 button on the remote control.
OR
Press the Input button on the front control panel until the input source is VGA2.
g To return to using computer 1
Press the VGA 1 button on the remote control.
OR
Press the Input button on the front control panel until the input source is VGA1.
C HA PT ER 6
Usingguestlaptopswithyour interactiveflatpanel
50