Filter
Top Products
C
ONFIGURING
THE
S
WITCH
2-40
Web – Click Address Table, Static Addresses. Specify the mode, the
interface, the MAC address and duration, then click Add Static
Address.
CLI – This example adds an address to the static address table, and
sets it to permanent by default.
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned
by monitoring the source address for traffic entering the switch.
When the destination address for inbound traffic is found in the
database, the packets intended for that address are forwarded
directly to the associated port. Otherwise, the traffic is flooded to
all ports.
Console(config)#mac-address-table static 00-e0-29-94-34-de
interface ethernet 1/3 3-107
Console(config)#