SMC Networks SMC7004VBR Network Router User Manual


 
7004VBR – Manual
30
6.2.8 | Tools
Use the “Tools” menu to backup the current configuration, restore a previously saved configuration,
restore factory settings, update firmware, and reset the Barricade.
Configuration Tools
o Backup
Backup saves the Barricade’s configuration to a file.
o Restore
To restore settings from a saved backup configuration file.
o Restore to factory defaults
Restores the Barricade settings back to the factory default settings.
Firmware Upgrade
This tool permits easy downloading of the latest Firmware. Download the upgrade file from
the SMC website (www.smc.com) and save it to your hard drive. Browse for the file and then
click “Apply”. Check the Status page Information section to confirm that the upgrade process
was successful.
Reboot
Click “Apply” to reboot the Barricade. The reset will be complete when the power LED stops
blinking.
Note: Some options, when enabled, will require you to reboot the router. You can use this
option to perform that function.
6.2.9 | Status
The Status screen displays WAN/LAN connection status, firmware, and hardware version numbers,
illegal attempts to access your network, as well as information on DHCP clients connected to your
network.
The following items are included on this screen:
1. INTERNET
Displays WAN connection type and status.
2. GATEWAY
Displays system IP settings, as well as DHCP and Firewall status.