Filter
Top Products
STEP 4: Assign a Trigger Button
Refer to your device’s user documentation to assign a trigger button.
If you do not want to assign a hardware button to trigger the
scanner, you can install Socket’s Floating Trigger, available on
the installation CD.
If SocketScan is not running yet, you can press the assigned
trigger button to quickly launch SocketScan. Pressing the
trigger button will fire the laser only when SocketScan is open.
1. Go to Start | Settings | Buttons.
2. From the Button list, select a button to trigger the SD Scan Card.
In the Button assignment field, select SocketScan. When done, tap ok.
Note: For maximum
ergonomic placement,
choose a button located
directly beneath your thumb
or forefinger when you hold
the Pocket PC. The Voice
Record button is a good
choice for most Pocket PCs.
12