Filter
Top Products
When data is read and sent to the mobile computing device, the laser
will turn off. Depending on your scanner settings, the scanner may beep
and/or the ring scanner’s LED may flash green to indicate a good read.
If no data is read in a few seconds, the laser will turn off, and you must
try again.
4. After a successful scan, data should appear in your document. By
default, the cursor automatically advances to the next cell or line, ready
for the next scan.
Wait for the “Good Scan” indication before you scan another bar code.
If you try to scan too fast, the device can lock up until you stop
scanning.
If your mobile device suspends or the CRS moves out of range, the
connection will end. After the mobile device turns on again or returns in
range, SocketScan will try to re-connect 3 times. If, after the 3 attempts,
they have not re-connected, you will need to manually re-connect the
devices.
To turn off the CRS, press the power button on the wrist unit for at least
2 seconds, until you hear 2 beeps.
For information about third-party applications compatible with the CRS
for asset tracking, warehouse mobility, and other vertical markets, visit:
www.socketcom.com/solutions/default.asp?Type=Vertical
CHAPTER 3: SETUP FOR WINDOWS MOBILE 23