Filter
Top Products
• CS trigger operation: Select whether you want the CRS to scan only
when a Bluetooth connection to the device is detected. If you select
• Scan only when connected to host, scanning will be a few
milliseconds slower.
• Good read indication on CS: Select how you would like the CRS to
indicate that it has successfully read data.
• Auto re-connect: Select the maximum number of attempts and time
limit per attempt for the CRS to try to reconnect to your computer in
case they are moved out of range from each other.
• Battery Level: No progress bar should appear since you are not
connected to the CRS.
• Power management: The CRS automatically shuts off if there is no
Bluetooth connection for 20 minutes. Check to disable.
• Advanced: When the computer is connected to the CRS, you can
modify the Bluetooth friendly name and security settings of the CRS.
3. Click on the CRS tab. Select which button on the CRS you would like to
use to trigger the scanner.
4. After entering settings, click OK to save the changes.
5. If SocketScan is open, you will be prompted to exit and restart SocketScan.
Click OK. Click on the SocketScan icon at the bottom of your screen and in
the pop-up menu, click Exit.
38