Soehnle 2790 Postal Equipment User Manual


 
Switching on
Only when the scale is not loaded.
Af
ter the test routine, the display is set to zero.
The scale is ready for use.
Place the weighing goods on the scale.
The display shows the gross weight.
Setting to zero
Necessary when the display does not show zero,
when unloaded. Possible zero range -1 % ... +3 % of
the weighing range.
Tare weighing
Tare (empty) container.
The scale is ready for net weighing.
Deleting tare weight
The display shows the
gross weight or 0.000 when unloaded
Plus/minus weighing
Place the test weight on the scale. Tare. Place the
item for checking on the scale. Read-of
f the devia-
tion.
Switch-off
Immediately possible when the display is "0". In other
cases, keep the button pressed for 3 seconds.
Printer/IT
Sends the dataset to the printer or IT equipment.
X 10 resolution
Press and hold down the Print key and then press
and hold down the zero key
.
Note
These functions are only executed when the scale is
at a st
andstill and up to 5 seconds after the key is
pressed.
16
ENGLISH
Ba_2790_D_GB_F_E_I.qxd 14.06.2006 08:28 Seite 16