13
ENGLISH
Switch on
Only when the scale is not loaded.
After the test routine, the display is set to zero.
The scale is ready for use.
Place the weighing goods on the scale.
The display shows the gross weight.
Setting to zero
If the display does not read zero when the scale is not loa-
ded, press the key. Possible zero range -2 % ... +2 % of
the weighing range.
Tare weighing
The scale has a tare function which allows the scale to be
tared over the entire weighing range. For additive tare, e.g.
to weigh multiple individual components of a formulation,
simply press the key between weighing each compo-
nent.
There are two ways to subtract a tare weight:
1. Automatically
Place the container on the platform and press the key.
The display is set to zero. The arrow sign points to "NET".
Place the weighing product on the scale. Once the display
stabilizes, the net weight of the weighing product is displayed.
2. Manual input
Enter a known tare weight using the numeric keypad.
Acknowledge by pressing the key as long as the value
is flashing.
Place the container on the platform.
Place the weighing product on the scale. After the display
stabilizes, the net weight of the weighing product is display-
ed.
Cancelling a tare
Press the key.
BA_9220_D_GB_F_E_P_I.qxd 24.02.2005 13:56 Seite 13