Filter
Top Products
14
ENGLISH
Counting
1. If piece weight is unknown
Press the key .
Count out the required number of pieces and place them on
the platform.
When the display is stable, the total weight of the reference
parts, the piece weight and the number of parts on the scale
are displayed.
You can now count further quantities of this part by placing
them on the platform.
2. If piece weight is known (manual input)
Enter a known piece weight using the numeric keypad.
Acknowledge by pressing the key as long as the value
is flashing.
The parts to be counted can now be placed on the scale.
The display shows the total weight, piece weight and total
piece count.
If samples are too light for a clear result, the message "
LIGHT SAMPLE" begins to flash.
To switch to weigh mode press the key an then key
2x.
Alarm function
An acoustic signal sounds when a pre-set piece count is
reached. Example: 100 pieces per pack.
Determine the piece weight as described above.
Press the key.
Enter the value 100 with the numeric keypad.
Press the key again.
A signal sounds after 100 pieces are counted.
To deactivate the alarm function, press the key, then
the key, then the key again.
Totalizing function
After determining a piece count, press the key.
The displayed piece count and weight are set to "0". An
arrow sign points to "M+", indicating that a value is stored in
the memory. Determine the next piece count. Press the
key again, and so forth
The total can be displayed by pressing the key.
Clear the memory with the key.
BA_9220_D_GB_F_E_P_I.qxd 24.02.2005 13:57 Seite 14