Filter
Top Products
3
■ Application
The Soehnle Professional Counting Scale 9222 is
designed for weighing goods and calculating unit
totals.
■ Safety Notices
Read the operator manual carefully before using
the equipment for the first time. It contains impor-
tant information on the installation, correct use and
maintenance of the equipment.
The manufacturer shall not be held liable if the
following notices are not complied with: Observe
the regulations in place when using electrical com-
ponents with important safety requirements. Never
carry out work on energised scales. Improper instal-
lation will invalidate the warranty. The electrical
connections must comply with the ratings printed
on the power supply unit.
The equipment is designed for use in buildings.
Note the permissible operating ambient tempera-
tures (specifications).
The equipment complies with electromagnetic
compatibility requirements. Avoid exceeding the
maximum values specified in the standards. If
you have any problems, contact your Soehnle
Professional service partner.
■ Cleaning
All you need to clean the equipment is a damp
cloth and a commercial cleaning agent. Do not use
scouring agents.
■ Maintenance and Service
The scales do not require regular maintenance.
However, it is worth checking their accuracy at
regular intervals. The frequency will depend on
the application and condition of the scales.
■ Note
In accordance with European directive 89/336/EEC
this device is fitted with noise suppression. How-
ever, the display reading can be affected by extreme
electrostatic or electromagnetic interference, e.g.
using a radio or mobile phone in the immediate
vicinity of the equipment. At the end of the inter-
ference the product can be used again for its pur-
pose, however it may need to be switched on
again. In the event of permanent electrostatic inter-
ference we recommend earthing the platform.
This device is a measuring instrument. Drafts, vibra-
tions, rapid changes in temperature and solar irradi-
ation can affect the scale reading.
The scales comply with safety rating IP 54. High air
humidity, steam, aggressive fluids and contamination
must be avoided.
1. GENERAL INFORMATION