Filter
Top Products
9
• Remove the reference pieces from
the platform and wait briefly until
the scales have calculated the unit
weight.
Other amounts placed on the scales will now also
be counted.
Compensating fluctuating weights
Place other reference pieces on the scales. Press
to calculate the exact unit weight.
x
1
Counting with a known unit weight
• Enter the known unit weight in
grams.
• Press
x
1
within 4 seconds, other-
wise the input will be deleted auto-
matically.
Other amounts placed on the scales will now also
be counted.
■ Setting Target Weights /
Quantities
ALARM
A top and bottom limit can be set for
weight or counted readings.
• Press
ALARM
.
"PCS. Hi" is displayed.
• Enter the maximum unit total.
• Press
ALARM
.
"PCS. Lo" is displayed.
• Enter the minimum unit total.
• Press
ALARM
.
"LoAd. Hi" is displayed.
• Enter upper target weight.
• Press
ALARM
.
"LoAd. Lo" is displayed.
• Enter lower target weight.
• Press
ALARM
.
If the limits are exceeded a signal sounds and the
warning arrow flashes on
or
.
Removing the limits
Select the target levels and delete with
C
.
■ Sum Total
ADD
• Calculate the unit weight as
described in "Counting".
• Place the goods on the scales and
wait until
appears.
• Press
ADD
and empty the scales.
• Place more goods on the scales and
wait until
appears.
• Press
ADD
again and empty the
scales...
The number of added readings is shown on
the left. Up to 180 readings can be stored.
Attention
• Changing the PLU deletes the sum total memory.
• The same unit totals cannot be added one after
another as the scales will assume that the plat-
form has not been cleared beforehand. A warn-
ing sounds.