Filter
Top Products
Page 12
5. WAN Network Mode - The second WAN network mode screen configures your
WAN settings for the selection you made in the previous screen.
Static IP
The Setup Wizard screen should display:
WAN Network Mode: NAT Enabled (Static IP)
Click Next.
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP server.
Click Next.
SonicWALL WAN IP
Address
Enter a single, static IP address. This must be in the
address range assigned to you by your ISP.
WAN Subnet Mask Enter the subnet mask for your network, provided by your
ISP. For example, 255.255.255.0.
Gateway (Router)
Address
Enter the IP address of your Internet gateway, provided by
your ISP.
DNS Server Address Enter the IP address of the DNS server for your network,
provided by your ISP.
DNS Server Address
#2 (optional)
You can enter a secondary, back-up DNS server to use if
the first one fails.