Filter
Top Products
SonicWALL TZ 180 Wireless Getting Started Guide Page 19
Unable to See the Setup Wizard?
• If you see the login screen, but not the Configuration Wizard:
• Configure your Internet browser to allow popups for the SonicWALL TZ
180 Wireless.
• Log into the security appliance using “admin” as the user name and
“password” as the password. After you log in, click the Wizards button
on the System > Status page.
• If you do not
see the login screen or the Configuration Wizard:
• Did you correctly enter the SonicWALL TZ 180 Wireless management
IP address, 192.168.168.168, in your Web browser?
• Is your computer set to accept DHCP addressing or set to a static IP
address within the 192.168.168.x subnet range? If not, see Appendix
A: Configuring DHCP IP Addressing section, on page 27 for
instructions on changing your Local Area Connection settings.
• Do you have the Ethernet cable connected between your computer
and the LAN (1) port on your SonicWALL TZ 180 Wireless?
• Do you need to add the SonicWALL TZ 180 Wireless to your list of
trusted sites? Use the default IP address (192.168.168.168) for this
purpose.
• Is the Test LED on the front panel of your SonicWALL TZ 180
Wireless lit? If the Test LED stays lit for more than a few minutes after
the initial power on sequence, cycle power to the SonicWALL TZ 180
Wireless.