Filter
Top Products
8
FWD-S42H1
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control Enquiry Standby Power On
0x7E On Screen Logo 0x00 OFF Yes Yes Enable Enable
0x01 ON (Default)
0x02 Reserved
0x7F LED 0x00 OFF Yes Yes Disable Enable
0x01 ON
0x81 Power On Delay 0x00-0x78 1sec
x Data Yes Yes Enable Enable
*1: Auto Signal Detect becomes Disable. When Option Slot is connected, Option command is Enable.
*2: Restricts a part of keys operation following below.
[Remote Commander]
Menu, Picture, Sound, ECO (Power Saving), Contrast
+/_,Brightness, Chroma, H Shift, V Shift, V size, PAP
[Main]
Menu
*3: Digital Signal Status is Enable for Digital Input Signal Detect Function only in Stable.
*4: Digital Signal or VIDEO Signal is Enable. Return Signal Status of Active Window.
*5: Only the panel power supply is turned off at the standby when setting it “ON”.
5. Analog Signal Detect Function
(a) Mode Control
Syntax Header Category Function Data1 Data2 Check Sum
Enquiry 0x83 0x00 Code Table (1-a) [a] Code Table (1-d) 0xFF 0xXX
Answer Header Answer Return to Data Size Return Data1 Data2 Check Sum
Enquiry 0x70 0x00 0x02 Code Table (1-a) [b] 0xFF 0xXX Completed
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control Enquiry Standby Power On
0x78 Analog Signal Detect 0x00 VIDEO No Yes Disable Enable
0x01 PC
Code Table (1-d)
Input Select
0x00 Main
0x01 Sub
0xFF Present input
1-a[b]
When input is no signal or not supported signal, return value become Video(0x00).