Filter
Top Products
35
FWD-S42H1
0
0
Community (32)
1
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
2 3
7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
(Bit position)
0
0
Item No(16) Data Length(8)
Request/Response(8)
1
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
2 3
7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
(Bit position)
3-2. Community
A request is executed when community coincides with the community set in display equipment. Commu-
nity consists of four (upper- or lower-case) alphanumeric characters. “SONY” is a factory-setting value.
The set character can be changed on the Web page.
Community packet
3-3. Command
The format of a request packet and response packet is described below.
Command packet
3-4. Request
The format when sending a request from a host to display equipment is described below.
Community
This is the same alphanumeric character as the community set in display equipment that sends a request.
Request
This is a request for display equipment.
Item No.
This is the item number to be treated for request.
Data Length
This is the length of data incident to a request. The maximum length is 128 bytes. The length of data is
“0” when no data exists.
Data
This is data incident to a request.
3-5. Response
The format when display equipment returns a response to the request from a host is described below.
Community
This contains the same alphanumeric character as a request. For a short header and short community, this
is embedded with 00h.
Response
This contains the result of a request.
Item No.
This is the item number to be treated for response.
Data Length
This is the length of data incident to a response. The maximum length is 128 bytes. The length of data is
“0” when no data exists.
Data
This is data incident to a response.