Filter
Top Products
29
FWD-S42H1
4-1. Community
A Community name is used as the password for SNMP access. The request received from an SNMP man-
ager is accepted when the Community name contained in the request coincides with the Community name
set. The request is rejected when the former does not coincide with the latter.
A maximum of three Communities can be set.
There are “Rights” and “Trap destinations” items in the property of Community. The property can be set
for each set Community.
n
When multiple Communities are set, all set Communities are validated.
1. Rights
The rights that can be set are as follows:
Read Only: An SNMP manager can reference MIB information using this Community name.
Read Write: This Community must be set when a write request is sent from an SNMP manager.
Other: Do not set this option because it is used for the function extension in future.
2. Trapdestinations
When Trap destinations are set, during trap occurrence, a trap is notied to the equipment set as trap
destinations using the Community name set.
Up to four Trap destinations can be set to one Community.
Trap destinations are not set in default.
n
This product can be set on only the Web screen because it does not install the automatic setting func-
tion of Trap destinations.
3. SettingprocedureofCommunity
Community can be added, edited, and removed.
The addition, editing, and removal procedures of Community are described below.
AdditionofCommunity
1. Click the [Add] button.
The “Community name”, “Rights”, and “Trap destinations” text boxes, and [Set|to|List] and
[Cancel] buttons are validated.
2. Type the Community name you want to add.
3. Set the Rights of Community and the Trap destinations you want to add.
When you want to save the setting, click the
[Set|to|List] button and then click the [Apply]
button at the bottom of the window.
m
. Click the [Cancel] button when you want to discard the setting during setting.
. When you want to save setting, be sure to click the [Set|to|List] button and then click the
[Apply] button.