Filter
Top Products
9
EN
2 Press the > / button.
The “COLOR TEMPERATURE” OSD appears.
3 Adjust with the > ?// and ¨ ./> buttons.
There are three color temperature modes on the OSD.
The factory settings are 1 : 5000K, 2 : 6500K, and 3 :
9300K.
To select 5000K, 6500K or 9300K
Press the > ?// buttons.
To obtain the desired color temperature
1 Press the > ?// buttons to select the 1, 2 or 3
mode.
2 Press the ¨ ./> buttons to select R, G or B.
3 Press the > ?// buttons to adjust the color
temperature.
The “5000K,” “6500K” or “9300K” disappears.
The color temperatures are memorized in the each
mode-1, 2 and 3 until you reset each.
To erase the “COLOR TEMPERATURE” OSD, press the
OPTION button again.
The OSD automatically disappears 30 seconds after you
release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Convergence
The adjustment data becomes the common setting for all
input signals received.
1 Press the CONV button.
The “CONVERGENCE” OSD (On Screen Display)
appears.
2 For vertical adjustment
Press the ¨ ./ > buttons.
. . . . to move Red down and Blue up
> . . . to move Red up and Blue down
For horizontal adjustment
Press the > ?// buttons.
? . . . to move Red to the left and Blue to the right
/ . . . to move Red to the right and Blue to the left
To erase the “CONVERGENCE” OSD, press the CONV
button again.
The “CONVERGENCE” OSD automatically disappears 10
seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Setting the Color Temperature
The selected color temperature becomes the common setting
for all input signals.
1 Press the OPTION button.
The OPTION OSD (On Screen Display) appears.
0 23
CONVERGENCE
CONV
R
G
B
123
76
66
55
9300K
SETSELECT
COLOR TEMPERATURE
R
G
B
123
76
66
55
9300K
SETSELECT
COLOR TEMPERATURE
OPTION
COLOR TEMPERATURE
INPUT:
LOCK:
SETSELECT
HD15 BNC
UNLOCK LOCK
80.0KHz/ 75Hz