Filter
Top Products
48
GB
Playing Back a Message at a Desired Time with an
Alarm (continued)
When the set date and time comes
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back (If you have selected “B-ONLY“ in step 5,
only the alarm will sound).
During alarm playback, “ALARM” will flash in the display window.
When the playback ends, the unit will stop automatically at the beginning
of that message.
1To listen to the same message again
Press the jog lever (x•B). The same message will be played back from the
beginning.
1To cancel the alarm setting before the playback starts
Press xSTOP while the alarm sound is heard. You can stop the alarm playback
even when the HOLD function is activated.
To cancel the alarm setting
In step 2 on page 45, select “OFF” and then press the jog lever (x•B).
To check the alarm setting
Follow steps 1 through 2 on page 45 to display the current alarm date and
time. Then follow steps 3 to 7 on pages 46 and 47 to change the alarm date
and time.
Notes
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
•If the alarm time comes during recording, the alarm will sound after the recording
is finished. “,” will flash when the alarm time comes.
• If more than one alarm time comes during recording, only the first message will
be played back.
•When the alarm time comes when the unit is in the menu mode, alarm will sound
and the menu mode will be cancelled.
• If you divide a message you set the alarm for, alarm setting remains on only the
first part of the divided message.
• If you combine messages you set the alarm for, the alarm setting of the latter
message will be cancelled.
• Alarm setting will not be cancelled when the alarm playback finishes.