Filter
Top Products
7
GB
Getting Started
Replacing the Batteries
The battery indicator on the display window shows the battery condition.
Notes
• Do not use manganese batteries for this unit.
• When you replace the batteries, insert the new ones within 3 minutes after you
remove the exhausted ones. Otherwise, the display may show the clock setting
display or incorrect date and time when you re-insert the batteries. In this
case, set the date and time again. The recorded messages and alarm setting,
however, will remain.
• Do not charge dry batteries.
• When you are not going to use the unit for a long time, remove the batteries to
prevent damage from battery leakage and corrosion.
Battery remain indication
: Replace both of the two batteries with new ones.
m
: The unit will stop operation.
Battery life* (Using Sony alkaline batteries LR03 (SG))
Recording mode: ST (Stereo) STLP SP LP
In recording: Approx. 12 hr. Approx. 14 hr. Approx. 16 hr. Approx. 20 hr.
In playback: Approx. 9 hr. Approx.9 hr. Approx. 11 hr. Approx. 13 hr.
(hr.: hours)
* In continuous recording/playback
* When playing back through the internal speaker with the medium volume
level
* The battery life may shorten depending on the operation of the unit.
Note on the “ACCESS” message
The unit is accessing data while
“ACCESS“ appears in the display
window or the OPR indicator flashes in
orange. While accessing, do not remove
the batteries or AC adaptor (excluding the Korean and the People’s
Republic of China models). Doing so may damage the data.
Note
If the unit is required to process excessive amount of data, “ACCESS” may be
displayed for an extended period of time. This is not a malfunction of the unit.
Wait until the message disappears before starting operation.