Sony ICD-PX820 Microcassette Recorder User Manual


 
ICD-PX820
4-166-309-11(1)
E:\Voce-P\4166309111\4166309111ICDPX820CE7\01GB-ICDPX820CE7\020REG.fm
Master: Right
3
GB
Notice for the customers: the
following information is only
applicable to equipment sold in
the countries applying EU
directives
The manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany. For any service
or guarantee matters please refer to the addresses
given in separate service or guarantee documents.
Trademarks
Microsoft, Windows, Windows Vista, Windows
Media, Outlook, DirectX and logos are trademarks
or registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Apple, Macintosh and Mac OS are trademarks of
Apple Inc., registered in the USA and other
countries.
Pentium is a registered trademark of Intel
Corporation.
Nuance, the Nuance logo, Dragon, Dragon
NaturallySpeaking, and RealSpeak are trademarks
and/or registered trademarks of Nuance
Communications Inc., and/or its affiliates in the
United States and/or other countries.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
“Memory Stick” and are trademarks of Sony
Corporation.
“LPEC” and are registered trademarks of
Sony Corporation.
US and foreign patents licensed from Dolby
Laboratories.
All other trademarks and registered trademarks are
trademarks or registered trademarks of their
respective holders. Furthermore, “ ™ ” and “
®
” are
not mentioned in each case in this manual.
The “Digital Voice Editor” uses software modules as
shown below:
Microsoft DirectX Runtime 9.0c
©2004 Microsoft Corporation. All Rights Reserved.
The recorded music is limited to private use only.
Use of the music beyond this limit requires
permission of the copyright holders.
Sony is not responsible for incomplete recording/
downloading or damaged data due to problems of
the IC recorder or computer.
Depending on the types of the text and characters,
the text shown on the IC recorder may not be
displayed properly on device. This is due to:
The capacity of the connected IC recorder.
The IC recorder is not functioning normally.
Content information is written in the language
or the character that is not supported by the IC
recorder.