Filter
Top Products
ICD-PX820
4-166-309-11(1)
E:\Voce-P\4166309111\4166309111ICDPX820CE7\01GB-ICDPX820CE7\060PLY.fm
Master: Right
43
GB
Other Playback Operations
automatically at the beginning of that
message when the playback ends.
To listen to the same message
again
Press N PLAY/STOP•ENTER, and the
same message will be played back from the
beginning.
To stop the alarm playback
Press any button other than VOL +/– while
the alarm sound is heard. If the HOLD
function is activated, you can stop the alarm
playback by pressing any button.
P Notes
• You can set only one alarm each one
message.
• “ALARM OFF (or ON)” will not appear and
the alarm cannot be set if the clock has not
been set or no message has been recorded in
the selected folder.
• When the clock has not been set or no
messages are recorded, you cannot set the
alarm.
• The alarm sounds even if you set “BEEP” to
“
OFF” in the menu (page 57).
• If you try to set the alarm to play back a
message at a previously set time on another
message, “PRE SET” will be displayed,
preventing new settings.
• If the alarm time comes during recording,
the alarm will sound after the recording is
finished. “,” will flash when the alarm time
comes.
• If the alarm time comes while you are
updating data, the alarm will be cancelled
automatically.
• If more than one alarm time comes, only the
first message will be played back with an
alarm.
• Once the alarm is set, the alarm will not be
cancelled, even after the message is played
back.
• If the alarm time comes while another
message is being played back with an alarm,
the payback stops and the new message will
be played back.
• If you divide a message you have set an
alarm for, the alarm setting remains on only
the first part of the divided message.
• If you delete a message on which you have
set an alarm, that alarm will be also
cancelled.
• If the alarm time comes during erasing
operation, alarm will sound for 10 seconds
after the erasing is finished and playback
begins.