Filter
Top Products
*All tuning key operation becomes ineffective when receiving the
priority channel with Priority Scanning (except for that using
+
or -). To switch to other scanning or tuning modes, exit Priority
Scanning first by pressing PRI/DELAY.
*Though the frequency step setting is memorized for the priority
channel, it has no effect on Priority Scanning.
*If you try to run Priority Scanning with no priority frequency
(i.e., there is no frequency preset for the priority channel, preset
channel 30 on page
10),
the following will be displayed
momentarily, and then the receiver will return to previous status.
PAGE
70
PRESET
3
/-l
JY
P
--- ---
*If you try to run Priority Scanning with the priority frequency
designated as a SKIP frequency, the following will be displayed
momentarily, and then the receiver will return to previous status.
*You cannot assign the priority frequency to any other channel
than channel 30 on page 10.
27