Filter
Top Products
14
-EN
Getting Started
TV SYS:B/G
VHF
LO
W
PR:01
ATT : OFF
MANUAL PROGRAM
ENTER ENTER
VOLUME: 0
TV SYS:B/G
VHF
LO
W
PR:01
ATT : OFF
MANUAL PROGRAM
ENTER ENTER
VOLUME: 0
PRESET
SKIP: PR02 OFF
TV SYS: B/G
COL SYS:AUTO
ENGL I SH
AUTO PROGRAM
MANUAL PROGRAM
LANGUAGE/
:
ENTER ENTER
TV SYS:B/G
VHF
LO
W
PR:01
ATT : OFF
MANUAL PROGRAM
ENTER ENTER
VOLUME: 0
4 Press V or v to move the cursor (z) to
MANUAL PROGRAM, and press ENTER.
5 Select the program position to which you
want to preset a channel.
(1) Make sure the cursor (z) appears beside PR, and
press ENTER.
(2) Press V/b/v/B until the program position you
want appears on the menu, and press ENTER.
6 Select the desired channel.
(1) Press V or v to move the cursor (z) to VHF LOW
(VHF Hi or UHF), and press ENTER.
(2) Press V/b/v/B until the desired channel picture
appears on the TV screen, and press ENTER.
7 Press MENU to return to the normal screen.
If the TV system is not properly selected
The picture color may be poor and/or the sound may
be noisy. In this case, select the appropriate TV system.
1 Press PROGR +/– or the number buttons to select
the program position.
2 Display the PRESET menu.
3 Press V or v to move the cursor (z) to TV SYS, and
press ENTER.
4 Press V/b/v/B until the appropriate TV system
appears, and press ENTER.
Notes
• The TV SYS (TV system), the ATT (attenuator), and the
VOLUME (volume offset) settings are memorized for each
program position.
• If you do not know your local TV system, consult your nearest
Sony dealer or authorized service center.
Attenuating the signal for individual
programs
If the TV signal is too strong, the picture may be
distorted. You can reduce the picture distortion by
attenuating the signal individually.
1 Display the PRESET menu.
2 Press V or v to move the cursor (z) to
MANUAL PROGRAM, and press ENTER.
3 Press V or v to move the cursor (z) to ATT,
and press ENTER.
4 Press V/b/v/B to select ON, and press ENTER.