Sony KP-XA43 Projector User Manual


 
5
-EN
Getting Started
WARNING
To prevent fire or shock hazard, do not expose the
projection TV to rain or moisture.
Dangerously high voltages are present inside the
projection TV. Do not open the cabinet. Refer
servicing to qualified personnel only.
For general safety:
Do not expose the projection TV to rain or moisture.
Do not open the rear cover.
For safe installation:
Do not block the ventilation openings.
Do not install the projection TV in hot, humid or
excessively dusty places.
Do not install the projection TV where it may be
exposed to mechanical vibrations.
Avoid operating the projection TV at temperatures
below 5°C (41°F).
If the projection TV is transported directly from a
cold to a warm location, or if the room temperature
has changed suddenly, the picture may be blurred or
show poor color. This is because moisture has
condensed on the mirror or lenses inside. If this
happens, let the moisture evaporate before using the
projection TV.
To obtain the best picture, do not expose the screen to
direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face the
screen with opaque drapery. It is desirable to install
the projection TV in a room where the floor and walls
are not of reflecting material. If necessary, cover
them with dark carpeting or wall paper.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
For safe operations:
Do not operate the projection TV on anything but
110–120/220-240 V AC, 50/60 Hz.
Do not operate the projection TV if any liquid or solid
object falls in it—have it checked immediately.
Do not keep the projection TV plugged in if you are
not going to use it for several days.
Do not pull the power cord to disconnect the
projection TV. Pull it out by the plug.
Caution
When using TV games, computers, and similar
products with your projection TV, keep the
brightness and contrast functions at low settings. If a
fixed (non-moving) pattern such as a station logo is
left on the screen for long periods of time at a high
brightness or contrast setting, the image can be
permanently imprinted onto the screen. These types
of imprints are not covered by your warranty.
Avoid touching the screen surface and do not scratch
it with hard objects.
Table of contents
Getting Started
6 Connections
9 Installing the projection TV
10 Getting to know the remote commander
11 Introducing the menu system
12 Changing the menu language
13 Presetting channels
16 Adjusting the convergence (CONVERGENCE)
Operations
17 Watching the TV
19 Adjusting the picture and sound
21 Listening with dynamic sound (POWER BASSO)
22 Listening to the surround sound (HYPER
SURROUND)
23 Selecting a stereo or bilingual program
24 Viewing Teletext
25 Operating optional components
27 Viewing a video game screen (GAME MODE)
28 Customizing the TV
Additional Information
29 Troubleshooting
30 Cleaning the screen
30 Specifications
EN