Filter
Top Products
Sony VAIO Slimtop LCD Computer User Guide22
PPK Setup Software Restrictions
If you use software that uses a phone line
❑
The computer may not be able to disconnect the phone line due to
communication and server conditions.
❑ Be sure to monitor the status of the software when running PPK
Setup, and manually disconnect the phone line if you notice a
malfunction. Furthermore, when using the timer to start the software,
it is advised that you set the computer to shut down or enter system
standby mode after a certain length of time. This allows the computer
to disconnect the phone line if the computer fails to disconnect the
line normally.
If you are using the timer to download e-mail automatically
It is advisable to set up your e-mail software to redial automatically if it
does not connect the first time. It is also advisable to set the e-mail
software to disconnect the phone line automatically when all mail has
been downloaded.
If you are using your 100 free hours of Internet access
In order to use the AutoAlert E-mail Notification System with your free
100 hours of Internet access from GTE, the Dial automatically setting
must be selected in your Microsoft
®
Outlook
®
98 software. If you have
not yet chosen this setting and wish to do so, start Outlook 98, click Send
and Receive, and then check the Dial automatically check box in the
dialog box that appears on the screen. (If the Dial automatically setting is
already selected, this dialog box will not appear.) For information on your
free GTE trial period, see page 5.