Filter
Top Products
LINE OUT/optical DIGITAL OUT jack
(page 29)
LINE IN jack (page 27)
MIC ATT (microphone attenuator) switch
(page 23)
USB connector (page 30)
DC IN 6V jack (page 20)
HOLD switch
When set to “ON,” the buttons on the
recorder are locked to prevent accidental
operation. It is recommended to set to “ON”
during recording and playback. To unlock
the controls, set to “OFF.”
Time information
Each time the DISPLAY button is pressed,
the time information changes as follows
(Flashes when the recorder is paused):
Elapsed recording/playback time
Remaining recordable time of the current
memory (During playback: Remaining
time of the current track)
Recorded date
(During recording: Recording start date)
Recording/playing status
Displays as follows according to the current
operation:
Recording
(Flashing)
Recording pause,
standby for recording
Playback
(Flashing)
Playback pause
Stop
/
Fast reverse/forward
/
Go to previous/succeeding
tracks
Peak meter (page 25)
Memory Stick indicator
Displayed when the current memory is a
“Memory Stick PRO (High Speed).”
Folder number, track numbers
Track numbers are displayed as “current
track number/total numbers of tracks.”
Sampling frequency and quantifying bit
number of currently recording/playing
track (page 35)
HPF (High Pass Filter) setting
Displayed when “200Hz HPF” is set to “ON”
(page 36).
Limiter setting
Displayed when “LIMITER” is set to “ON”
(page 35).
Remaining memory volume
Displayed the remaining volume of current
memory (page 26).
File name of currently recording/playing
track
Remaining battery power (page 20)
17
Overview
PCM-D1. US. 2-664-971-11(1)