Filter
Top Products
Step 2: Setting the clock
Recorded audio files (tracks) are named
using the date and time of the internal clock.
By setting the clock before recording, the
recording’s date and time will be correctly
saved.
1
When the recorder is turned on before
the clock has been set, “SET CLOCK”
appears in the display. After about 3
seconds, the message disappears
automatically, and the “CLOCK” display
of the menu appears.
2
Press the UP and DOWN
buttons to set the year (y), and press the
ENTER button.
3
Repeat step 2 to set the month (m), day
(d), hour, minute, and second. Then press
the ENTER button after setting the
seconds to start operating the clock.
To reset the clock
1 While the recorder is stopped, press the
MENU button to display the menu.
2 Press the UP and DOWN
buttons to select “CLOCK,” and press the
ENTER button.
The “CLOCK” display appears.
3 Follow steps 2 and 3 of “Step 2: Setting
the clock” to reset the clock.
Note
• If you leave the recorder for more than
approximately 10 minutes with no battery inserted,
the date and time change to the default settings. In
this case, reset the clock.
21
Getting Started
PCM-D1. US. 2-664-971-11(1)