Sony MX25 Projector User Manual


 
60
Specifications
Preset memory No. at the input signal
Analog signals
When a signal other than the preset signals shown above is input, the picture may not be displayed
properly.
An input signal meant for screen resolution different from that of the panel will not be displayed
in its original resolution. Text and lines may be uneven.
When a moving image is played back from signals whose fV (Vertical Frequency) is over 60 Hz,
the picture may not be displayed properly.
41 1152 × 864 VESA 70 63.995 70.019 H-pos, V-pos 1472
42 VESA 75 67.500 75.000 H-pos, V-pos 1600
43 VESA 85 77.487 85.057 H-pos, V-pos 1568
44 1152 × 900 SUN LO 61.795 65.960 H-neg, V-neg 1504
45 1280 × 960 VESA 60 60.000 60.000 H-pos, V-pos 1800
46 VESA 75 75.000 75.000 H-pos, V-pos 1728
47 1280 × 1024 VESA 60 63.974 60.013 H-pos, V-pos 1688
48 SXGA VESA75 79.976 75.025 H-pos, V-pos 1688
50 1400 × 1050 SXGA+ 65.317 59.978 H-neg, V-pos 1864
55 1280 × 768 1280 × 768/60 47.776 59.870 H-neg, V-pos 1664
56 1280 × 720 1280 × 720/60 44.772 59.855 H-neg, V-pos 1664
60 1360 × 768 1360 × 768/60 44.720 59.799 H-neg, V-pos 1776
61 1440 × 900 1400 × 900/60 55.935 59.887 H-neg, V-pos 1904
63 1280 × 800 1280 × 800/60 49.702 59.810 H-neg, V-pos 1680
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync Pitch
Signal Preset memory No.
Video (VIDEO connector) 1, 2
Component (INPUT A connector) 3-11
Video GBR (INPUT A connector) 3-11
Computer (INPUT A connector) 21-48, 50, 55, 56, 60, 61, 63
Notes