Filter
Top Products
Recording starts.
This unit adjust the recording level automatically.
Press .
Press . “PAUSE” and the tape counter
appear in the display alternately. To
resume recording, press again.
Recording level adjustment mode has
been preset to SPEECH. To change the
mode to MUSIC or adjust the recording
level manually, refer to “Adjusting the
recording level” (page 17).
After finishing step 3, slide REC while
pressing the red button after pressing .
The recorder enters recording standby
mode. When you want to start
recording, press .
You can play the tape recorded with the
NT-2 smoothly without a break when
the tape changes from the FWD
(forward) side to the REV (reverse) side
(“Memory reverse function”, page 36).
If you start recording less than 10
minutes before the end of the FWD side,
“memory reverse” may not function.