Sony PCGNV200 Laptop User Manual


 
Connecting and disconnecting PC Card drives
The PC Card drive enables you to read data stored on a DVD or CD. Your computer may come with an external PC Card
drive, depending on the model you purchased. If you wish to purchase an optional PC Card drive, shop Sony online at
http://www.sonystyle.com/vaio or contact your local retailer.
If you connect a non-Sony DVD drive to your VAIO
®
computer, DVD playback may not function properly. The
supplied DVD software must be installed to play a DVD. For best performance, use a Sony compatible DVD drive.
To connect an PC Card drive
You can connect a PC Card drive while the computer is turned on. Connecting the drive when the computer is in a power
saving mode (Standby or Hibernate) may cause the computer to malfunction.
Instructions on connecting an optical drive may vary, depending on the specific drive you purchased.
1.
Remove the PC Card from the bottom of the optical drive.
Removing a PC Card
2.
Insert the PC Card into the PC Card slot with the arrow facing the slot. See To insert a PC Card for more
information.
Remove the protective cover that is attached to the lens of the optical drive before you use the drive. See Inserting
and Ejecting CDs or DVDs for information on how to open the optical drive to access the lens.
See the guide that comes with your optical drive for more information on its installation and use.
To disconnect a PC Card drive
1.
Close any active programs to prevent data loss.
2.
Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window
appears.
3.
Select the PC Card drive in the Hardware devices window, if it is not already selected.
4.
Click Stop. The Stop a Hardware device window appears.
5.
Make sure the PC Card drive is selected, and click OK. A message appears stating it is now safe to remove the
hardware device.
6.
Eject the PC Card from the PC Card slot.
Page 110