Filter
Top Products
Sony Notebook User Guide
Connecting peripheral devices
49
nN
You cannot connect the docking station when the notebook is in a power saving mode. Return to normal mode before docking.
Do not connect the docking station when the battery is removed.
If the battery is charged, you can connect the notebook to the docking station even when the notebook is on.
Make sure all cables and peripherals are removed before connecting your main unit to the docking station.
The LCD display may be damaged if you press the top of the notebook too forcefully.
Disconnecting your computer from the docking station
To disconnect your computer from the docking station, proceed as follows:
1 If the notebook is off, simply follow steps 3 to 5.
2 If the notebook is on, click Start, then Eject PC or pull the UNDOCK switch towards you.
3 Close the cover of your notebook.
4 Grab the right and left release levers (1) and pull them to the outside until you hear two clicks.