Filter
Top Products
Sony Notebook User Guide
Getting help
77
nN
4 Select Settings from the Start menu, then click Control Panel.
5 Double-click System.
6 Select the Hardware tab, then click Device Manager.
7 Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
8 Select Operation, then Delete.
9 Keep clicking OK until the message Confirmation of deletion of device appears.
10 Perform the Scan to change hardware from Operation.
The UFD5 will be recognized as drive A.
The floppy disk drive in the optional docking station connected to the notebook is not recognized as drive A
To set the docking station floppy disk drive to A, proceed as follows :
1 Turn the system power off and disconnect all peripherals.
2 Connect the docking station, then turn the system power on.
3 Select Settings from the Start menu, then click Control Panel.
4 Double-click System.
5 Select the Hardware tab, then click Device Manager.
6 Select Floppy disk controllers, then Standard floppy disk controller.
7 Select Operation, then Delete.
8 Keep clicking OK until the message Confirmation of deletion of device appears.
9 Perform the Scan to change hardware from Operation.
The docking station floppy disk drive will be recognized as drive A.