Filter
Top Products
VAIO Computer Reference Manual
20
AGP_INT Switch
You can enable or disable the onboard AGP interrupt.
To enable or disable the AGP_INT, perform the following steps:
1
Remove the system cover (see “Removing the System Cover” on
page 24).
2
Set the switch to ON (Enable) or OFF (Disable). The default is ON
(see also “Configuration Switches (SW)” on page 67).
3
Reinstall the system cover (see “Replacing the System Cover” on
page 25).
O
N
123456
KY0093.VS
D
AGP_INT switch
O
N
123456
ON
OFF
SW