Filter
Top Products
To Description
Install the Reader
software, or
transfer data
Tap [Yes] to install the Reader software, or transfer files from your
computer to the Reader while charging. The Reader cannot be
operated during transfer.
After the USB storage screen is displayed on the Reader, it is
detected on your computer, and the “READER” and “SETUP” drives
appear on your computer.
When the
icon* turns into the icon, charging is complete.
When charging is complete, disconnect the USB cable from the
Reader and your computer.
After a short time, the [Home] screen will appear.
* This icon is only displayed when the Reader is in data transfer mode.
Charge the Reader
Tap [No], or press the
(Back) button, to return to the previous
screen.
Alternatively, press the
(Home) button. The [Home] screen
appears. When the icon turns into the icon, charging is
complete.
In this mode, the Reader is not detected by your computer*. When
charging is complete, disconnect the USB cable from the Reader and
your computer.
* This situation may vary, depending on the settings of your computer.
Note
Your computer must be turned on to charge the Reader. The Reader will not be charged if
your computer enters sleep mode or standby mode. Keep your computer turned on with a
stable and continuous power supply while charging the Reader.
The
(Power) button cannot be used when the Reader is connected to your computer and
29