Filter
Top Products
54
Item Procedure
Sensitivity of the
distance sensor
1 Rotate the tail switch once.
AIBO lies down with all legs sprawled out.
2 Place your hand or other object over the distance
sensor (AIBO’s nose).
When the distance sensor detects the object, a beep
is emitted. (When the volume level of the musical
tone is set to mute, no beep is emitted.) The pitch of
the beep changes depending on the distance
between the object and the sensor. If the object is
too close or too far, the sensor may not be able to
detect it. Adjust the distance between the object and
the sensor.
3 Rotate the tail switch again.
AIBO resumes the repetition of the original
sequence of actions: stands up, sits down, lies
down.
Pick-up mode 1 Pick AIBO up from the floor.
AIBO stops moving, its legs become loose and the
mode indicator turns on. If you pick it up too
slowly, the legs may not become loose. In this case,
keep holding AIBO and push the tail switch away
from AIBO’s head for three seconds.
2 Place AIBO on the floor or push up the tail
switch towards AIBO’s head for three seconds.
AIBO resumes the repetition of the original
sequence of actions: stands up, sits down, lies
down.
You can
rotate in
either
direction