Filter
Top Products
28-US
Symptom Cause and/or Corrective Actions
The print lamps 3 and 4
are flashing fast.
The CARTRIDGE lamp is
flashing fast.
Printing stops midway,
and the PAPER lamp is
flashing fast.
You cannot select SAME,
MULTI or MARKED in
the menu settings on your
camcorder.
The printed image has a
black frame.
You cannot remove print
paper.
•The inside of the printer has become too
hot.
t Leave this unit until it cools down,
then resume printing images.
•The ribbon has run out.
t Replace the print cartridge with a
new one.
•You have left the printer cartridge in
high temperature so that the ribbon is
damaged.
t Replace the print cartridge with a
new one.
•An error has occured during printing.
t Turn off your camcorder once, and
then set it to MEMORY again.
t Charge the battery, and reinstall it.
•Print paper is not inserted, and the still
image to print is not played back.
t Insert print paper, and play back the
still image to print.
•A frame sometimes appears when you
use this unit on a camcorder other than
the one you used for recording images
to “Memory Stick.” This is not a
malfunction.
•Print paper is jammed.
t Contact your Sony dealer or local
authorized Sony facility.
Troubleshooting (continued)